Aleksandar's computer workshop

Let's see what Aleksandar was fixing today.
My findings, tips & tricks related to computers, internet, programming and other stuff I was working with.

How to enable AHCI mode after installing Windows

AHCI (Advanced Host Controller Interface) is present on newer Intel chipsets such as 975X (ICH7), P965 (ICH8), and P35 (ICH9). AHCI mode is enabled in the BIOS and 3 settings are commonly available: IDE, AHCI, and RAID. The last two (AHCI and RAID) require a driver floppy and the F6 method when installing Windows XP otherwise the hard disks won't be detected.

AHCI mode brings 3 main advantages:
Supports NCQ (Native Command Queuing) allowing SATA drives to accept more than one command at a time and dynamically reorder the commands for maximum efficiency.
Supports hot plugging of devices
Supports staggered spin ups of multiple hard drives at boot time

However, in the real world the performance difference isn't huge.

The problem is that if you installed Windows in IDE mode (i.e. you didn't use F6 and supply a driver disk), then simply changing the BIOS setting to AHCI mode and rebooting will cause Windows to fail and will require a repair install. Most people have been advising to reinstall Windows if you want AHCI enabled.

Here you will find the sollution :

http://forums.pcper.com/showthread.php?t=444831

Copy of the article is here (5.07 kb)

Comments are closed